xyz軟體王

CID12379--ThunderSoft Photo Gallery Creator 4.4.0 攝像影集管理軟體 英文破解版
DVD29659--CADS RC 2024.0 領先的鋼筋混凝土詳圖設計軟體 英文破解版(DVD一片裝)
CID12215--ContourTrace 2.8.3 x64 專業的圖像輪廓提取軟體 英文破解版
DVDP4319--InventorCAM 2023 SP3 HF2 for Autodesk Inventor 2018-2025 x64 無縫集成cam軟體 英文破解版(DVD9一片裝 此片售價200元)
CID12273--XMind 2024 v24.04.10301 x64 思維導圖軟體 英文破解版

軟體簡介:

PTC.PROGRESSIVE.DIE.EXTENSION.V2.1 壓模設計英文版 (2片裝)


安裝資訊請參看 CD1 \CRACK\ 目錄中安裝說明 以下為英文說明如看不懂請勿購買

你必須擁有且安裝 Pro/ENGINEER 2001 or WILDFIRE or WILDFIRE2.0 在你之前
安裝 PDX2.1 and 你的 Pro/E license 必須支持 #208 feature(Progressive Die feature).

Install PDX2.1 till finish,
then

For Pro/E WILDFIRE or WILDFIRE 2.0:

if you have your own Pro/ENGINEER CONFIG.PRO file, you should open \text\config.pro with editor(e.g. Notepad) and copy all its contents then append these contents into your Pro/ENGINEER CONFIG.PRO, then save your own Pro/ENGINEER CONFIG.PRO.

if you didn't configigure your Pro/ENGINEER(No config.pro), just drop this \text\config.pro into any one of the following places:
A. your HOME directory
B. your Pro/ENGINEER working directory
C. your \text directory

then copy \text\config.win to your Pro/ENGINEER working directory or HOME directory.

That's all for Pro/ENGINEER WILDFIRE or WILDFIRE 2.0.

if you are using Pro/ENGINEER 2001, you should do the following step,otherwise you'll see a wrong message box
" Startup of application 'Progressive Die Extension failed' and those wrong messages "Pro/TOOLKIT application '
Progressive Die Extension' was built to run with a newer version of Pro/ENGINEER. " .

now please open \text\protk.dat with editor
find string : \$PRO_MACHINE_TYPE\pdx21.dll
chang it to : \$PRO_MACHINE_TYPE\pdx21_2001.dll


有了 Progressive Die Extension (PDX)，Pro/ENGINEER Wildfire 可幫助漸進式壓模設計者大大縮短週期、提高
品質，並有助於他們更方便地與客戶、製造等任何與工具包開發有關的人員進行交流。主要改進包括新的
自動化漸進式壓模設計功能，以及即時、對等連接功能，後者通過線上設計復審可使問題得到快速解決。